SMX1000RT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
1000VA/700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures, upright tower placement also supported (2 post installation supported with optional 2POSTRMKITWM accessory)
Large internal batteries offer runtimes of 17 minutes at half load (500VA/350 watts) and 7 minutes at full load (1000VA/700 watts)
Maintains regulated 230V nominal output during brownouts and overvoltages from 159 to 282V
Tripp Lite's SMX1000RT2U intelligent, line interactive rack/tower uninterruptible power supply prevents data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Requires only two rack spaces (2U) in a standard rack enclosure, with included accessories for upright tower placement. Maintains regulated 230V nominal output without using battery power during brownouts and overvoltages from 159 to 282V. 1000VA/700 watt power handling capability and full time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes a total of 6 outlets with 2 load banks that are individually controllable via software interface to reboot select equipment on demand or shed less significant loads to extend battery runtime for more critical equipment. Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter. Emergency Power Off (EPO) interface offers option for instantaneous power-off of UPS and connected equipment in the case of fire or emergency situation. Multi-function audible alarms and set of 5 front panel LEDs offer at-a-glance notification of UPS and line power status. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges and line noise. Attractive all-black color scheme.
SMX1000RT2U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
1000VA/700 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
Supports 2U rackmount installation in 4 post rack enclosures, upright tower placement also supported (2 post installation supported with optional 2POSTRMKITWM accessory)
Large internal batteries offer runtimes of 17 minutes at half load (500VA/350 watts) and 7 minutes at full load (1000VA/700 watts)
Maintains regulated 230V nominal output during brownouts and overvoltages from 159 to 282V
Includes 6 UPS-supported outlets with 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface
C14 inlet accepts user-supplied AC power cord with country specific plug
Offers simultaneous monitoring by up to 2 directly-connected devices through included USB and DB9 interface ports, or the monitoring by any number of additional servers over IP with included PowerAlert monitoring software
Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for delayed or immediate reboot of connected devices
Supports Tripp Lite's WatchDog software application to restore operation to locked equipment through soft reboot of application, OS or hard power off/on reboot of connected equipment - ideal for unattended kiosk applications (requires optional WATCHDOGSW)
Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
Network-grade AC surge suppression
Attractive all-black color scheme
UPS battery set ships fully assembled, no time consuming connection of internal batteries by user is necessary
Package Includes: UPS System with 4 post rackmount hardware, Two 1.8m IEC320-C13 to C14 load jumper cables, Cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/Power monitoring software and Warranty information
UPS input connection description:
C14 inlet accepts user-supplied AC power cord with country specific plug.
Input circuit breaker:
10A
Half load runtime (minutes):
21 min. (350w)
Voltage regulation description:
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 159 to 282
Overvoltage correction:
Input voltages between 245 and 282 are reduced by 12%
Undervoltage correction:
Input voltages between 159 and 199 are boosted by 14%
UPS AC suppression joule rating:
480
UPS AC suppression response time:
Instantaneous
EMI / RFI AC noise suppression:
Yes
UPS Shipping dimensions (height x width x depth ):
9 x 24 x 20.2 inches
Storage Temperature Range:
+5 to +122 °F
Relative Humidity:
0 to 95 % non-condensing
AC mode BTU / hr. (full load):
73.6
Battery mode BTU / hr. (full load):
522.4
Transfer Time:
2-4 milliseconds
Low voltage transfer to battery power (setpoint):
159
High voltage transfer to battery power (setpoint):
282
UPS Certifications:
Tested to UL1778 (USA); Tested to CE (EU); Tested to GOST (Russia); Tested to SASO (Saudi Arabia); Tested to IRAM (Argentina); Meets FCC Part 15 Category B (EMI)
RoHS Compliant:
Yes
Cisco Compatible:
Yes
WEXT2E
- 2-Year Extended Warranty - For select Tripp Lite Products
WEXT3E
- 3-Year Extended Warranty - For select Tripp Lite Products