- Register
- Log in
- Wishlist (0)
-
Shopping cart
(0)
You have no items in your shopping cart.
2-Channel Dante Amplifier
Model: AC-DANTE-AMP-2CH
- Dante – As a Dante-compatible audio device, the AC-DANTE-AMP-2CH may be used to amplify
- speakers in systems from any manufacturer’s products encoding and processing Dante Audio streams.
- Mini OLED Screen – Once connected, the OLED screen allows techs to verify volume levels are correctly set for the speaker-level and line-level outputs. The display provides real-time feedback for changes made on the unit or remotely via the API.
- Small Chassis – Supplied brackets and the small chassis form factor enable discrete, rack-free mounting for the AC-DANTE-AMP-2CH.
- Simple Settings – 4 dipswitch settings configure the unit for set-and-forget installation or enable volume for the unit to be remotely adjusted.
The AC-DANTE-AMP-2CH is a combination 25W/RMS (at 4 W, 12.5 W/RMS at 8 W ) 2-channel local audio power amplifier and Dante Audio/AES67 decoder, supporting sampling rates of 44.1kHz, 48kHz, 88.2kHz, and 96kHz with 16-, 24-, and 32-bit word lengths encoded as either the Dante audio or AES67 format. Encrypted Dante audio information is input via the designated Dante Audio network RJ45 network port, undergoes decoding from Dante digital into analog, and outputs a speaker-level signal from a pair of secured, 2-pin terminal block connectors, plus line-level audio by way of a 5-pin terminal block connector.
Utilizing Audinate’s newest Ultimo chip, the AC-DANTE-AMP-2CH is designed to accommodate two Dante plug-and-play audio flows with very low latency and microsecond synchronization. Line-out cascades the signal to additional analog amplifiers from a single Dante endpoint. Flexible placement options are made possible by the compact, thin profile footprint.
A mini-OLED screen provides status information for the model, firmware version, LAN IP address, DANTE IP address, and the volume setting the unit is currently set at. The display may be configured to remain off when discrete operation is desired. TCP/IP and RS-232 controls allow for remote API changes, including muting, volume lock, and balance adjustments.
Whether for an impromptu temporary setup or to address a last-minute project add-on, the versatile AC-DANTE-AMP-2CH is a valuable resource for integrators working with DANTE audio.
- Dante – As a Dante-compatible audio device, the AC-DANTE-AMP-2CH may be used to amplify
- speakers in systems from any manufacturer’s products encoding and processing Dante Audio streams.
- Mini OLED Screen – Once connected, the OLED screen allows techs to verify volume levels are correctly set for the speaker-level and line-level outputs. The display provides real-time feedback for changes made on the unit or remotely via the API.
- Small Chassis – Supplied brackets and the small chassis form factor enable discrete, rack-free mounting for the AC-DANTE-AMP-2CH.
- Simple Settings – 4 dipswitch settings configure the unit for set-and-forget installation or enable volume for the unit to be remotely adjusted.
- Locking Power Connector – Prevents the unit from falling offline in installations where vibration may be present.
- 10-year Warranty – The AC-DANTE-AMP-2CH is fully covered by the industry-leading AVPro Edge hassle-free, no BS 10-year warranty.
- Includes:
- (1x) AC-DANTE-AMP-2CH
- (1x) 24V-5.0A Power Supply
- (1x) 3-Pin Terminal Block Connector for RS-232 Port
- (1x) 5-Pin Terminal Block Connector for Line Level Output
- (2x) Secured, 2-Pin Speaker Terminal Block Connection
- (2x) Mounting Brackets
- (4x) Mounting Screws
- Amplifier Type - Power Amplifier
- Dante Enabled - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 123.80 F
- Operating Temperature (Minimum): 23 F
- Certifications: FCC, CE
- Number of Channels: 2
- Power Handling: 100 Watt
- Current Draw: 5 Amps
- DC Voltage: 24 Volts
- Depth: 3.54 in
- Height: 1.38 in
- Shipping Depth (with packaging): 2.17 in
- Shipping Height (with packaging): 7.08 in
- Shipping Width (with packaging): 12.20 in
- Width: 5.51 in
- Product Weight: 0.98 lbs
- Shipping Weight: 2.59 lbs
- Color: Black
- Warranty (Length/Type): 10 Years
- Dante Flows: 2
- Line Level Output: 1 VRMS (balanced) maximum output, 1.5 VRMS (balanced) with 3 dB boost active
- Speaker Level Output: 2x25WRMS Stereo Speaker Level Outputs, Rated 25WRMS maximum at 0dBFS, 4-ohms load
- Ethernet: 1x Dante network Ethernet, 1x Control network Ethernet
- Screw terminals: 1x amplified speaker output, 1x balanced line level output
- RS232: For device control only
- Storage Temperature: -4 to 140°F (-20 to 60°C)
- Operating Humidity: 5-90% RH (No Condensation)
- Mounting: Wall/furniture mount ears included
Smiley's Audio Visual, Inc.
PO Box 6925
Lakeland, FL 33807
USA
(863)667-1998
www.smileysaudiovisual.com